Unicorp


Unicorp

Electronic Hardware Manufacturer

291 Cleveland Street
Orange, New Jersey 07050 USA
toll free (from USA): 866-UNICORP
tel: 973-674-1700
fax: 973-674-3803

www.unicorpinc.com

Unicorp Product Overview

Standoffs-Threaded

Shapes: Round, Square, Hex
Diameters: 1/8″ through 3/4″; 3mm through 19mm
Materials: Brass, Aluminum, Stainless Steel, Carbon Steel, Nylon, Teflon®, Linen Base Phenolic, 10% Glass-Filled Lexan®, Delrin®, Ultem® Finishes: Available in 28 finishes

Spacers-Unthreaded

Shapes: Round, Square, Hex
Diameters: 1/8″ through 3/4″; 3mm through 19mm
Materials: Brass, Aluminum, Stainless Steel, Carbon Steel, Nylon, Teflon®, Linen Base Phenolic, 10% Glass-Filled Lexan®, Delrin®, Ultem® Finishes: Available in 28 finishes

Swage / Rivet Standoffs

Threaded, Unthreaded and Rivet Type, Swaging Tools
Shapes: Round, Hex
Diameters: 1/8″ through 3/8″; 3mm through 10mm
Materials: Brass, Aluminum, Stainless Steel, Carbon Steel
Finishes: Available in 28 finishes

Male-Female Standoffs

Internal and External Threads
Shapes: Round, Square, Hex
Diameters: 1/8″ through 1/2″ ; 3mm through 13mm
Materials: Brass, Aluminum, Stainless Steel, Carbon Steel, Nylon, Delrin®
Finishes: Available in 28 finishes

Hex Jack Screws

Internal and External Threads
Shapes: Hex
Diameters: 3/16″ ; 4.5mm & 5mm
Materials: Brass, Aluminum, Stainless Steel, Carbon Steel
Finishes: Available in 26 finishes

Male-Male Standoffs

External Threads
Shapes: Round, Square, Hex
Diameters: 1/8″ through 1/2″ ; 3mm through 13mm
Materials: Brass, Aluminum, Stainless Steel, Carbon Steel, Nylon, Delrin®
Finishes: Available in 26 finishes

Captive Panel Hardware

Screws, Retainers, Retaining Washers, Springs and Decorative Panel Washers
Head: Knurled and Slotted
Configurations: Round Head Screws: Knurled /Slotted- Knurled /Unslotted. Hex Head Screws: Slotted & Unslotted. Hex Head Screws are not knurled.
Materials: Brass, Aluminum, Stainless Steel, Carbon Steel
Retainers: Standard and Spring Loaded
Finishes: Available in 24 finishes

Insulating Washers

Shoulder and Flat
Diameters: 1/8″ through 1″ ; 3mm through 25mm
Shapes: Shoulder Washers, Flat Washers- Precision Machined, Not Molded
Materials: Nylon, Teflon ®, Glass-Filled Lexan®, Linen Base Phenolic, Ultem®, Delrin®
Finishes: Colored material available upon request

Thumb Screws

Knurl Type, Shoulder, Plain, Push
Diameters: 5/32″ through 1/2″ ; 4mm through 13mm
Materials: Brass, Aluminum, Stainless Steel, Carbon Steel
Finishes: Available in 20 finishes

Thumb Nuts

Round & Hex, knurl & no knurl
Diameters: 1/4″ through 3/4″
Materials: Brass, Aluminum, Stainless Steel, Carbon Steel
Finishes: Available in 20 finishes
Thread: 2-56 through 3/8-16

Handles & Ferrules

Panel and Rack, Fixed and Folding, Decorative Ferrules
Shapes: Round, Oval, Rectangular, Half-Round, Extruded
Styles: Internal Thread, External Thread, Offset, Extruded, Fixed, Folding
Materials: Brass, Aluminum, Stainless Steel, and Carbon Steel upon request
Decorative Ferrules: Threaded and Unthreaded
Finishes: Available in 28 finishes

Shoulder Screws

Slotted & Hex Socket Head (Broached)
Head Shapes: Round, Slotted or Hex Socket Head (Broached)
Diameters: 1/4″ through 3/4″ ; 6mm through 16mm
Materials: Type 303 Stainless Steel, Other materials available upon request

Self Clinching Fasteners

  • Nuts For Sheet Metal:
    Floating Nuts, Blind Press Nuts, Locking Nylon Insert Nuts, Flush Nuts, Spinning Flare Nuts, Standard Nuts, KAL Nuts, Locking Thread Floating Nuts, Locking Thread Nuts, Standard Nuts, Lock Nuts, Standard Nuts for Ultra Thin Sheets, Miniature Nuts
  • Studs & Pins For Sheet Metal:
    Concealed-Head Studs, Threaded Flush-Head Studs, Untheaded Flush-Head Studs, Low Displacement-Head Studs, High-Strength Studs For Thin Sheets, High-Strength Studs, High-Tensile-Strength Studs, Swaging Collar Studs, Studs For Thin Sheets, Heavy Duty Studs for Thin Sheets, Pilot Pins, Pilot Pins with Tapered Points
  • Standoffs For Sheet Metal:
    Blind Threaded, Concealed Head, Close-To-Edge, Male Standoffs, Slide Top, Thru-Hole Threaded, Thru-Hole Unthreaded, Grounding, Spring-Top, Thin Sheet Threaded
  • Captive Panel Screws & Hardware:
    Floating Receptacle Nuts, Receptable Nuts, Flush-Mounted Retainers, Flush-Mounted Screws, Spring-Loaded Low-Profile Slotted-Head Panel Fasteners, Spring-Loaded Low-Profile Knob Panel Fasteners, Spring-Loaded Screw Heads, Spring-Loaded Non-Flush Captive Panel Screw (tool installation), Spring-Loaded Non-Flush Captive Panel Screw with Anti-Cross Thread-Tool Installation, Screw Head Without Spring, Spring-Loaded Locating Pins, Spinning Clinch Bolt Captive Panel Screw without Spring – Tool Installation only

Cable Tie Combo-Packs

Materials: Nylon 6/6, Natural Nylon 6/6, Black Nylon 6/6. One piece construction.
Colors: Fluorescent Nylon 6/6, Natural Nylon 6/6, Black Nylon 6/6.

Adhesive Back Mounting Bases

Materials: Natural Nylon 6/6 or Black Nylon 6/6 Colors: Natural Nylon 6/6 is the standard color. Available in Black Nylon 6/6.

Cable Tie Fastener Tools

Materials: Plastic and Metal See Metric Sizes

Flexible Polyolefin Tubing

Materials: Flexible Polyolefin Tubing